3.Repeatedly press 1 to select the desired input signal (TV or CATV).
•If you connected an antenna (not cable) to the Model 28 and want to receive up to 68 VHF/UHF channels, or if you have cable service and use a cable box, you must select TV from the channel set up menu.
•If you have cable service and do not use a cable box, you must select CATV from the channel set up menu.
4.Press MENU to exit the menu.
SETTING THE CLOCK
You must set the clock accurately for proper au- tomatic timer recording. We suggest you use a TV or radio station as your time source.
Follow these steps to set the clock.
1.Press MENU on the remote control to select the main menu. The menu appears on the TV screen.
2.Press 3 on the remote control to select
SETTING CLOCK. The clock setting screen appears, and
- SETTING CLOCK -
MONTH DAY | YEAR | ||
- - | / | - - | - - - - |
HOUR MINUTE | AM/PM | ||
- - | / | - - | - - |
3.Use the number keys on the remote control to enter the correct month, day, and year as mm dd yyyy. For example, to set May 22, 1996, press 0, 5, 2, 2, 1, 9, 9, and 6.
Notes:
•Precede a
•If you enter an incorrect number, repeat- edly press ADD/DELETE to move back or SELECT to move forward to the incorrect number, then enter the correct number.
When you enter the month, day, and year, the day of the week automatically appears on the TV screen. For example, if you set May 22, 1996, WED (Wednesday) appears on the TV screen.
4.Use the number keys on the remote control to enter the correct hour and minute as hh mm. For example, to set 10:28, press 1, 0, 2, and 8.
5.Press 1 for an AM hour or 2 for a PM hour. AM or PM flashes.
6.Review the entered information.
• If it is not correct, repeatedly press ADD/ DELETE (to move backward) or SELECT (to move forward) to the incorrect infor- mation, then enter the correct informa- tion.
• If it is correct, press MENU. The screen disappears.
When you press MENU, the seconds begin counting from 00 and the current time appears on the TV screen for about 5 sec- onds, then disappears.
Note: If the display shows abnormal infor- mation or no information, unplug the power cord (AC or DC) for about 1 minute. Then plug it back in and repeat this procedure to reset the clock.
19
