7.Use the number keys on the remote control to enter the program’s start hour and minute. For example, press 1, 0, 2, and 8 to set 10:28.
8.Press 1 or 2 on the remote control to select AM (1) or PM. (2).
9.Repeat Steps 7 and 8 to enter the stop hour and minute.
10.Use the number keys on the remote control to enter the channel number. For example, press 0 and 7 to set channel 7.
11.Press 1 (SP), 2 (LP), or 3 (SLP) on the remote control to set the tape speed.
12.
•If it is correct, press MENU to exit the menu.
•If an entry is not correct, repeatedly press
SELECT to move forward or ADD/DELETE to move backward to the incorrect entry, use the number keys to enter the correct information, then press MENU. The Model 28 stores any settings you entered, and the timer program screen disappears.
Notes:
•If you press ADD/DELETE after selecting the program number (the program num- ber flashes), the Model 28 clears the timer program screen and deletes any settings you entered.
•After you make a tape speed selection, pressing SELECT causes the timer pro- gram screen to disappear and stores any settings you entered.
13.To store other programs, repeat Steps 2- 12.
14.Press POWER to turn off the Model 28. The TIMER REC indicator turns on to indicate that the Model 28 is in the timer standby mode.
Important:
•You can turn on and operate the Model 28 manually prior to the set recording times, but the Model 28 makes automatic timer recording(s) only if the power is off at the set start time(s).
•Be sure the TIMER REC indicator turns on when you turn off the Model 28. If it does not, check your programming.
•If you set up the Model 28 to record a CATV program through a cable box, be sure to leave the cable box turned on and tuned to the correct channel before the timer pro- gram starts.
Checking/Changing Automatic Timers
1.Press POWER to turn on the Model 28.
2.Press MENU. The main menu appears on the TV screen.
3.Press 1 on the remote control to select
TIMER PROGRAMMING. The timer pro- gram screen appears on the TV screen.
4.Use the number buttons
PROG |
| 1 2 3 4 5 6 7 8 |
|
DATE
START TIME
END TIME
CHANNEL
TAPE SPEED
5.Review all the displayed information.
•If it is correct, press MENU to exit the menu.
•If an entry is not correct, repeatedly press
SELECT to move forward or ADD/DELETE to move backward to the incorrect entry, use the number keys to enter the correct information, then press MENU. The Model 28 stores any settings you entered, and the timer program screen disappears.
32
