21
3. Repeatedly press SELECT within 5 seconds
until the setting you want to adjust appears
on the TV screen.
Note: If you do not press SELECT within 5
seconds, the displayed setting disappears.
Simply repeat Steps 1-2 to redisplay the
setting.
4. Within 5 seconds, repeatedly press CH
or CH to adjust the displayed setting. A
bar graph appears on the TV screen to
show the current setting.
Notes:
• To quickly change the displayed setting,
press and hold down CH or
CH .
• If you do not press CH or
CH with-
in 5 seconds, the displayed setting dis-
appears. Repeat Steps 1-3 to redisplay
the setting.
5. Either wait 5 seconds or press MENU to exit
the screen.
USING MUTE
To temporarily turn off the Model 28’s sound,
press
MUTE.
MUTE and the volume level bar ap-
pear on the TV screen.
To restore the sound to the previous level, press
MUTE again. To restore the sound and change
its level, press VOL or
VOL .
USING CHANNEL RETURN
The Model 28’s channel return function lets you
quickly switch between channels you tuned by
using the remote control’s number buttons.
Repeatedly press
CHANNEL RETURN to
switch from the channel
you are watching (or
AUX) to the previous
channel you tuned (or

AUX), and vice versa.

VIEWING AN EXTERNAL DEVICE
To view the signals from an external device con-
nected to the audio/video input jacks on the front
or back of the Model 28, do either of the f ollowi ng:
• Enter 00 using the remote con trol’s number
buttons
• Select one channel higher than the highest
programmed channel or one channel lower
than the lowest programmed channel.
AUX appears on the TV screen.
CH CH
CONTRAST to decrease to increase
BRIGHT to decrease to increase
COLOR toward pale toward brilliant
TINT toward purple toward green
SHARPNESS toward soft toward clear
[-] [+]
CONTRAST
POWER
MUTE
EJECT
123
456
789
0 +100
CH
VOL
MONITOR SLEEP
CHANNEL
RETURN
SELECT
ADD/
DELETE
MENU
C.RESET
C.MEMORY
REWIND PLAY F.FWD
RECORD STOP PAUSE/STILL
SPEED
16-420.fm Page 21 Tue sday, July 20, 1999 11:32 AM