BASIC TV OPERATION
SELECTING CHANNELS
To select a channel, press CH 
or CH 
. The tuner automatically advances to the next channel stored in the tuner’s memory.
POWER |
| EJECT | MUTE |
1 | 2 | 3 | MENU |
4 | 5 | 6 | SELECT |
7 | 8 | 9 | DELETE |
|
|
| ADD/ |
C.RESET
0+100 C.MEMORY
VOL MONITOR SLEEP CH
CHANNEL
SPEED RETURN
REWIND PLAY
F.FWD
RECORD | STOP | PAUSE/STILL |
You can also press CHANNEL 
or CHANNEL 
on the Model 28 to select channels.
L VOLUME K | L CHANNEL K |
MONITOR
Note: If you press CH 
when the tuner is at the highest programmed channel or CH 
when the tuner is at the lowest programmed channel, the Model 28 enters the audio/video mode and AUX appears on the TV screen (see “Viewing an Ex- ternal Device” on Page 21). If you press CH 
or CH 
again, the Model 28 tunes to the lowest or highest programmed channel.
You can also select channels directly using the number keys on the remote control. You can choose any channel in the tuner’s range, even if you have not programmed the channel, there is no broadcast present, or the channel is scram- bled (the tuner does not unscramble the channel).
Notes:
•Precede a
•If you selected the CATV input signal (see “Selecting the Input Signal” on Page 18), press +100 to enter a
VIEWING TV
Follow these steps to view a broadcast using the TV.
1.If necessary, press POWER to turn on the Model 28.
2.If necessary, select the desired input signal (TV or CATV).
3.Select the channel you want to watch.
4.If you are using the indoor antenna, extend and rotate it to get the best reception.
Note: To improve UHF reception, shorten the indoor antenna.
5.Repeatedly press VOLUME 
or VOLUME
on the Model 28 (or VOL 
or VOL 
on the remote control) to adjust the volume to your listening preferences. A bar graph and a number appear on the TV screen to show the currently set volume.
Note: To adjust the contrast, brightness, color, tint, or sharpness, see “Adjusting the Picture.”
ADJUSTING THE PICTURE
Follow these steps to adjust the picture’s con- trast, brightness, color, tint, or sharpness.
1.Press MENU on the remote control to select the main menu. The menu appears on the TV screen.
2.Press 2 on the remote control to select
PICTURE CONTROL. CONTRAST and a bar appear on the TV screen.
20
