Assembly Overview
ARobot’s assembly normally takes about 2 hours or less excluding time for painting. Children as young as 10 can build ARobot with the help of an adult. The controller board and cables are
During assembly you will do these things:
Sand and paint the metal robot body pieces (this is optional).
Mounting whiskers, drive motor, steering motor, wheels, etc.
Route cables.
Install the Basic Stamp II onto the controller board.
You’ll learn:
Identification and names of all parts.
Screw, nut, and washer sizes.
Basic electronic terminology.
Basic mechanical assembly techniques.
Basic wiring skills.
Tools you’ll need:
Medium Phillips screwdriver
Needle nose pliers
Sand paper
Wire cutters
9
