It is forbidden to install or use the machine if it is be wet or damp.
It is always necessary to request an accu- rate check by qualified personnel in order to find any possible damages to the electric components.
4.1. Counter-instructions
This machine may be used only for the purposes for which it was designed. It cannot be used to di- spense products other than coffee or any non food products.
The manufacturer cannot be held re- sponsible for any damage caused by unsuitable, erroneous or irrational use of the machine.
5.TRANSPORT
5.1.Packaging
The machine must always be transported in a correct position following the instructions on the cardboard box.
Do not turn over the machine or lay it down on a side.
The box also contains separate accessories and a technical documentation which must be saved for further consultations.
●Open the top part of the packaging, remove the accessories and then remove the machine from its packaging.
●Check if the machine, the accessories, the electric cable and the plug are in perfect condition. Should one of these parts be damaged, immediately con- tact the retailer.
The packing elements (plastic bags, expan- ded polystyrene, nails, cardboard, etc.) must not be left within reach of children as they are potential sources of danger.
Do not dispose of the packing elements in the environment; consign them to firms authori- zed for their disposal,
6. INSTALLATION
The machine is delivered ready to be installed in accordance to the label data.
Ensure that the electrical supply system has the same features as the machine.
The electrical supply system must be equip- ped with a life saving device or a general automatic switch with an efficient earthing system. Should there be no electrical pro- tection element, have a
The earthing of the appliance is compul- sory.
The constructor declines all responsibi- lity in the event of the failure to respect the accident prevention norms.
Take care not to damage the supply cable by pressing, or crushing.
Do not disconnect the machine by pulling the cable, but detach by gripping the plug.
The machine is not to be positioned in any niches or similar difficult positions in order to prevent problems relating to operation, supply and maintenance.
●The machine must be placed on a completely level surface, that is both dry and sufficiently stable and at a height of 80 cm from the ground.
●Position the machine and connect the plug to the power socket.
30
