Accessories

Figure 34: Mounting the Air Purge Jacket

1.Remove the sensor (1) and cable from the electronic box by disconnecting the wires from the electronic box.

2.Open the Air Purging Jacket (3, 4) and screw the white plastic fitting (2) onto the sensor up to the end of the threads, do not over tighten!

3.Slip the cable (6) through the backside (4) of the jacket.

4.Close the Air Purging Jacket (3, 4) and reconnect the wires to the electronic box and apply the mounting nut (5).

MI

51

Page 59
Image 59
RayTek MI Miniature Infrared Sensor operating instructions Mounting the Air Purge Jacket