Language Areacode, Okexit, Telephone Setup | RCA 21011 specification

WALL MOUNTING THE BASE

NOTE: For best results, leave the phone on a flat surface during initial charging before you hang the phone on the wall.

1.Turn the base over.

2.Attach the wall mounting pedestal by first inserting the tabs on the open edge of the pedestal into the slots on the lower portion of the bottom of the base. Then push down and snap the pedestal into place.

3.Slip the mounting holes (on the back of the pedestal) over the wall plate posts and slide the unit down into place. (Wall plate not included.)

TELEPHONE SETUP

PROGRAMMABLE FUNCTIONS

This system uses a menu structure and soft key function buttons to give you access to all of the built-in features.

USING THE SOFT KEYS

There are three buttons under the display box which represent several soft key (programmable) functions. Use the buttons to activate the soft key icons that appear in the display box. You may program the following items with the soft keys: Language, Display Contrast, Area Code, Ringer Tone, Time, Tone/Pulse, Registration, Deregistration, Walkie-Talkie, and Default Setting.

LANGUAGE

This setting may be made with the handset or the base.

1.Make sure your phone is OFF (not in talk mode).

2.Press the MENU soft key to go to the main menu.

LANGUAGE

AREACODE

OKEXIT

12

Image 12

RCA 21011 manual Language Areacode, Okexit, Telephone Setup

Contents

21011 Equipment Approval Information Notification to the LocalTelephone Company Table of Contents Savethese Instructions Features Introduction Your Caller ID Call Waiting phone allows you to Handset and Charge Cradle Layout Base Layout Before YOU Begin Make sure your package includes the items shown here Important Installation Information Installing the Phone Installing the Handset Battery Telephone Setup Language AreacodeOkexit English Setlanguage 1ENG 2FRA 3ESPLanguage Contrast Exit Contrast Areacode RingertoneSET Areacode Languageareacode Areacoderingertone Ringer Tone Ringer Tone Tone / Pulse TimeSET Tone / Pulse 1 Tone 2 Pulse Okexit Tone Ringertone Registration Confirm Registration ? Handset RegisteredHandsetneedsregister Registrationhandset ? Hold Basepage Wait for Beep Billsmith Handset Enter Name BillsmithMenudir Movenear Tobase Deregistration WalkietalkieDE-REGISTER Handset 1 ? Handset Deregistered Confirm Deregistration ? Walkie Talkie Enable ? Walkie Talkiewalkie Talkie ENABLEDHANDSET1EXITDeregistration Walkie Talkie Handset # Disabled Walkie Talkie HANDSET#Walkie Talkie Extension ? Walkie Talkie With Handset # TONE/PULSE Time SET Time Defaultsetting Language Defaultsetting YES 2NODefaultsetting Defaultsetting Basic Operation Making a Call Handset Ringer on Name Handset Ringer High HI 2LOW 3OFF Ringer LOWNEW CALL00 Line on Hold Conf Trans Exit Line Active Paging Extension ?Paging Handset Mute Hold DIR Pagingfrom HANDSET1 Line on Hold Extension ? Pagingfrom Handset PAGING/LINEONHOLD SteveMute on Temporary Tone Dialing Paging PagingfromMute Receiving AN Intercom Call PAGING/LINEONHOLD HANDSET1Line on HOLD/INTERCOM Select Memory Edit DEL ExitMemory Enter Telnumbr Menu DIR Storing a Redial Number Peter Chan Delete ? Dialing a Stored Number Handset 000000000000000 Receiving and Storing Call Records Save DEL Exit You may transfer a Caller ID record to your phone ’s memory Replace MEMO? Eleven digits Delete Call ID? Deleted No Calls Delete ALL ? Replacing the Battery Headset and Belt Clip Installation Display Messages Incomplete Data Handset Sound Signals Troubleshooting GuidePage Caller ID Solutions General Product Care Service Causes of Poor Reception Index Page Orcompletethisorderform Limited Warranty For how long after your purchase