5.Press the OK soft key to save your selection, and return to the main menu. The new ringer tone is displayed for two seconds.

RINGER TONE - 2

NOTE: Press the EXIT soft key once to keep the previous setting and return to the main menu screen.

RINGER TONE

 

AREACODE

 

REGISTRATION

EXIT

RINGERTONE

EXIT

OK

OK

HANDSET DISPLAY

 

BASE DISPLAY

 

TONE/PULSE

Most telephone systems use tone dialing, however, some may still use pulse dialing. Depending on your telephone system, set the dialing mode as follows:

This setting may be made with the base only.

1.Make sure your base is in the menu mode. If your base is not in the menu mode, press the MENU soft key.

2.Press the CID (up or down arrow) button on the base to scroll to

TONE/PULSE.

TONE / PULSE

TIME

OKEXIT

3.Press the OK soft key and SET TONE/PULSE 1TONE 2PULSE shows in the display.

SET TONE / PULSE 1 TONE 2 PULSE

OKEXIT

17

Page 17
Image 17
RCA 21011 manual Ringer Tone, Tone / Pulse Time, SET Tone / Pulse 1 Tone 2 Pulse Okexit