Tone, Ringertone Registration | RCA 21011 specs

4.Use the touch tone pad on the base to select 1TONE or 2PULSE, or press the CID (up or down arrow) button to move the arrow to your selection. The default setting is 1.

5.Press the OK soft key to save your selection, and return to the main menu. The dialing mode displays for two seconds.

TONE

NOTE: Press the EXIT soft key once to keep the previous setting and return to the main menu screen.

TONE / PULSE

TIME

OKEXIT

NOTE: If you aren’t sure which dialing system you have, set the telephone to tone dialing and make a test call. If the call connects, the setting is correct. If the call does not connect, set the telephone to pulse dialing.

HANDSET REGISTRATION

This setting may be made with the handset only. During the registration process, keep your handset near the base. Make sure your handset is at the main menu. Make sure your phone is OFF (not in talk mode).

1.Make sure your handset is at the main menu. If your handset is not in the menu mode, press the MENU soft key.

2.Press the cid/vol (up or down arrow) button to scroll to REGISTRATION.

RINGERTONE

REGISTRATION

OKEXIT

3. Press the OK soft key and REGISTER HANDSET? shows in the display.

18

Image 18

RCA 21011 manual Tone, Ringertone Registration

Contents

21011 Equipment Approval Information Notification to the LocalTelephone Company Table of Contents Savethese Instructions Features Introduction Your Caller ID Call Waiting phone allows you to Handset and Charge Cradle Layout Base Layout Before YOU Begin Make sure your package includes the items shown here Important Installation Information Installing the Phone Installing the Handset Battery Telephone Setup Language AreacodeOkexit Language Contrast EnglishSetlanguage 1ENG 2FRA 3ESP Exit Contrast Areacode RingertoneSET Areacode Languageareacode Areacoderingertone Ringer Tone Ringer Tone Tone / Pulse TimeSET Tone / Pulse 1 Tone 2 Pulse Okexit Tone Ringertone Registration Handsetneedsregister Registrationhandset ? Confirm Registration ?Handset Registered Hold Basepage Wait for Beep Billsmith Handset Enter Name BillsmithMenudir Movenear Tobase Deregistration WalkietalkieDE-REGISTER Handset 1 ? Handset Deregistered Confirm Deregistration ? Walkie Talkie Enable ? Walkie Talkiewalkie Talkie ENABLEDHANDSET1EXITDeregistration Walkie Talkie Walkie Talkie Extension ? Handset # DisabledWalkie Talkie HANDSET# Walkie Talkie With Handset # TONE/PULSE Time SET Time Defaultsetting Defaultsetting LanguageDefaultsetting YES 2NO Defaultsetting Basic Operation Making a Call Handset Ringer on Name Handset Ringer High HI 2LOW 3OFF Ringer LOWNEW CALL00 Line on Hold Conf Trans Exit Paging Handset Line ActivePaging Extension ? Mute Hold DIR Pagingfrom HANDSET1 Line on Hold Extension ? Pagingfrom Handset PAGING/LINEONHOLD SteveMute on Temporary Tone Dialing Paging PagingfromMute Receiving AN Intercom Call PAGING/LINEONHOLD HANDSET1Line on HOLD/INTERCOM Select Memory Edit DEL ExitMemory Enter Telnumbr Menu DIR Storing a Redial Number Peter Chan Delete ? Dialing a Stored Number Handset 000000000000000 Receiving and Storing Call Records Save DEL Exit You may transfer a Caller ID record to your phone ’s memory Replace MEMO? Eleven digits Delete Call ID? Deleted No Calls Delete ALL ? Replacing the Battery Headset and Belt Clip Installation Display Messages Incomplete Data Handset Sound Signals Troubleshooting GuidePage Caller ID Solutions General Product Care Service Causes of Poor Reception Index Page Orcompletethisorderform Limited Warranty For how long after your purchase