BASE
1. Press the ringer button and the current ringer setting shows in the display.
RINGER HIGH
1 HI 2LOW 3OFF
OKEXIT
2.Use the touch tone pad on your handset to enter 1HI, 2LOW, or 3OFF, or use the CID (up and down arrow) to scroll to your selection.
3.Press the OK soft key to save your selection, and the ringer setting shows in the display for two seconds then returns to standby mode.
RINGER LOW
01:15 PM
NEW CALL00
MENUDIR
FLASH/CALL WAITING
If you subscribe to the combined Call Waiting Caller ID service from your local telephone company, you will receive Caller ID information (if available) on Call Waiting calls. During a phone call you will hear a beep, which indicates another call is waiting on the line, and Caller ID information shows in the handset display.To connect to the waiting call, press the flash button on the handset and your original call is put on hold.You may switch back and forth between the two calls by pressing the flash button.
TIP: Don’t press the talk/callback button on the handset or the speaker/ callback button on the base to activate a custom calling service, such as call waiting, or you’ll hang up the phone.
30
