RCA 21011 manual Replace MEMO?, Exit

3.Press the desired memory location button. Example, press the number 01 key to store the record in memory location 1. If the memory location is occupied and, you want to replace it, you must confirm the replacement by pressing the OK soft key.

MEMO

#--

SELECTMEMORY 01-50

EXIT

MEMO

#01

765-4321

REPLACE MEMO?

OKEXIT

NOTE: Press EXIT soft key once to keep previous the setting and return to the Caller ID menu. Or, press and hold the EXIT soft key on handset to return to standby mode.

DIALING A CALLER ID NUMBER

While reviewing Caller ID records, you may call the caller phone number showing in the display.

1.Make sure the phone is OFF (not in talk mode).

2.Press cid/vol (up or down arrow) button on the handset or CID (up or down arrow) button on the base until the desired call record is displayed. Depending on (a) how the incoming phone number was formatted when it was received, and (b) whether or not you previously pre-programmed your local area code into memory, you may need to adjust the format of the incoming caller ’s stored phone number before dialing it back. The format button lets you change the format of the displayed number.

47