DISPLAY MESSAGES
The following indicators show the status of a message or of the unit.
INCOMPLETE DATA | Caller information has been interrupted during |
| transmission or the phone line is excessively noisy. |
ENTER NAME | Prompt telling you to enter the name in one of the |
| 50 memory locations. |
DELETE ALL? | Prompt asking if you want to erase all Caller ID |
| records. |
DELETE CALL ID? | Prompt asking if you want to erase the current |
| Caller ID record that is shown on the display. |
DELETE? | Prompt asking if you want to erase one of the 50 |
| numbers stored in the phone's outgoing memory. |
END OF LIST | Indicates that there is no additional information in |
| Caller ID memory. |
NEW | Indicates call or calls have not been reviewed. |
UNKNOWN CALLER | The incoming call is from an area not serviced by |
| Caller ID or the information was not sent |
PAGING | Someone has pressed the page/int button on the |
| base or handset. |
BLOCKED NUMBER | The person is calling from a number that has been |
| blocked from transmission. |
REPT | Repeat call message. Indicates that a new call from |
| the same number was received more than once. |
SEARCHING | Handset is searching the base. |
NO DATA | No Caller ID information was received. |
OUT OF RANGE | Handset is too far away from the base. Move closer to |
| the base. |
53
