RCA 608, 620 IP Addresses, Add/change an IP address, Select Obtain an IP address automatically

Chapter 5

Expert Configuration

5.3.1 IP Addresses

Overview The IP address table shows all IP addresses configured on any of SpeedTouch™’s interfaces.

In the table following information is provided per IP address:

The Interface to which the IP address applies

The IP address/Netmask (in prefix notation)

The IP address Type, being either:

auto, in case the address has been automatically assigned by the SpeedTouch™ at startup or via negotiation

extra, in case of a manually configured IP address.

You can also assign additional new IP addresses to the SpeedTouch™ (see

Add/change an IP address).

In case you select an IP address entry, you can:

Make changes to the IP address configuration (see Add/change an IP address) and click Apply.

Click Delete to delete the IP address.

Add/change an IP To add a new IP address to the SpeedTouch™: address 1 Click New.

2 Select the Interface to which the IP address must apply.

3Either:

Type a valid IP address/mask (in prefix notation).

Select Obtain an IP address automatically.

4Click Apply to add the IP address.

To change the configuration of an existing IP address:

1Select the IP address entry.

2Make your changes.

3Click Apply.

122 E-DOC-CTC-20051017-0151 v1.0