RCA 608, 620 Source Interface and IP Address range, Destination Interface and IP Address range

Chapter 4

Basic Configuration

Select a row using the Edit link to modify the security rule.

Click Add to create a new security rule.

5Edit or define following parameters of the rule: The Name of the security rule

The Source Interface and IP Address (range)

Use Any as IP address in case all traffic for the interface should be parsed.

Or you can type a User-definedIP address (range).

The Destination Interface and IP Address (range)

Use Any as IP address in case all traffic for the interface should be parsed.

Or you can type a User-definedIP address (range).

The Service type of the traffic; this can be a protocol (dns, smtp, ...) or a specific SpeedTouch™ system service.

6Select an Action that should be done on traffic for which the security rules applies:

Accept: to allow the traffic to pass

Deny: to drop the traffic (without notification)

Count: to let the traffic pass, but count it (Hits)

7Click Apply.

74 E-DOC-CTC-20051017-0151 v1.0