RCA 605, 620, 608WL manual Introduction Creating a Routed PPPoA connection entry

Chapter 5

Expert Configuration

5.4.3 Routed PPPoA

Introduction

Creating a Routed PPPoA connection entry

The Routed PPPoA configuration page allows you to add new Routed PPPoA connection entries or to change settings of existing entries.

To add a Routed PPPoA connection entry:

1Click New.

2In the Interface box, type a unique interface name (different from the MER interface name).

3In the Destination list, click the appropriate Routed Ethernet destination indicated by the Routed Ethernet interface name

4Type user name and password for the account at the ISP [optional].

5Click Apply.

Additional configuration Once created, per Routed PPPoA connection, additional configuration is possible by clicking:

Routing

Other

These parameters can only be modified when the link is down. Take the link down first by clicking Hang-up.

Routing Following fields are available:

Destination:

Controls the networks that can be reached via this particular PPP connection.

Specify the remote host or network in prefix notation. e.g. 172.16.0.0/16.

Label:

Allows you to assign a label to this connection.

E-DOC-CTC-20051017-0151 v1.0 141