To verify USB connectivity in Windows
To install Mac USB drivers
Chapter 2
Local Network Setup
The SpeedTouch™ USB connection is represented as a local network interface. You can easily check this interface by opening the Network Connections window from Windows’ Control Panel.
You can find the required USB driver software on the Setup CD. The installation is Plug and Play, meaning that installation requires almost no effort.
Proceed as follows:
1Insert the blue USB cable into the SpeedTouch™ USB port marked with the USB logo.
A USB logo looks like this:
2Plug the other end of the USB cable into (one of) the USB port(s) of your computer. In most cases your computer's USB port is marked with the same USB symbol.
You can also connect your computer to the SpeedTouch™ via a USB hub, provided that the hub is autonomously powered.
Mac OS X will automatically recognise the detection of a new port.
3Make sure the SpeedTouch™ Setup CD is inserted, and then click OK.
4In the Network window, click Apply Now.
Device settings Once you have connected a device, you can personalise its settings. For more information, see “ Device settings” on page 15.
19 | |
|