Chapter 4

Voice over IP

Verifying telephone connectivity

provided by your ISP:

Some of the SIP components are explained below:

Proxy: The SIP proxy server at your provider’s forwards signalling messages between the caller and callee.

Registrar: The SIP registrar resembles a DNS, as it matches your URI with your IP address. Your SpeedTouch™ will periodically - depending on the expire time - register its correct IP address with the SIP registrar that may be collocated with the proxy server.

Expire Time: This is the frequency with which your IP address is updated on the registrar.

5Click Apply.

Proceed as follows to verify the voice connection:

1Make sure the SpeedTouch™ is turned on and ready for service.

2Check whether your phone is properly attached to the SpeedTouch™.

3Make sure the Internet telephony service is enabled and configured.

4The VoIP Ready LED must be lit.

5Pick up your phone, wait for the dialling tone, and dial the number. If you dial a ‘#’ after the phone number, the phone number will be called instantly.

The phone(s) attached to the SpeedTouch™ can receive incoming VoIP calls, as long as your SpeedTouch™ is turned on and the VoIP Ready LED is lit.

For calls over the regular phone line, your phones are line powered by the telephone company and can therefore always be reached, even if the modem is turned off.

40

E-DOC-CTC-20051017-0149 v1.0