
Chapter 4
Voice over IP
To use the service: | Proceed as follows: | |
|
| |
Conference Call (3 Parties) | To set up a conference call: | |
| 1 | Call person A. |
| 2 | Dial R, 2. |
|
| Person A is put on hold. |
| 3 | Wait for the dialling tone. |
| 4 | Dial the number of person B. |
|
| Person B picks up the phone. |
| 5 | Dial R, 3. |
| Once the conference call has been established, you | |
| can: |
|
| 1 | Dial R, 2 to put the 2 calls on hold. |
| 2 | Dial R, 3 to retrieve the 2 held calls. |
|
| |
CLIR on call basis | It is possible to hide your phone number for one | |
| particular call. Dial *31* directly followed by the | |
| phone number of person A. | |
|
| |
Forced FXO | To make a phone call over the regular telephone | |
| line: |
|
| 1 | Dial *01*. |
| 2 | Wait for the dialling tone, and then dial the |
|
| phone number of person A. |
|
|
|
Command overview The table below lists all standard service codes of the telephony services. These might be different on your SpeedTouch™, depending on your provider.
Phone command: | Is used to: |
|
|
R 0 | drop a held call |
| reject an incoming call |
|
|
R 1 | terminate an active call and switch to the |
| waiting or held call |
|
|
R 2 | put a call on hold |
| switch between active and waiting or held call |
| put a conference call on hold |
|
|
R 3 | establish a |
|
|
R 4 | transfer a call |
|
|
*31* | make an anonymous call (use CLIR) on call |
| basis |
|
|
*01* | use the regular telephone line |
|
|
Address book On the SpeedTouch™ Web pages, an address book is available list your contacts, so that you can easily call or
46 | |
|