Using the services on the phone

Chapter 4

Voice over IP

The following table explains how to use a telephony service. The commands depend on your provider’s configuration and might be different from those described here. For more information, see your provider’s documentation.

Make sure your phone is off-hook when you dial the commands.

If your phone does not have an R or another hook flash button, put down the hook for 1/2 second and then dial the command number.

To use the service:

Proceed as follows:

 

 

Call Hold

To put person A on hold:

 

1

Dial R, 2 to put the call with person A on hold.

 

2

Dial R, 1 to retrieve the call on hold.

 

To put person A on hold and set up a call to person

 

B:

 

 

1

Dial R, 2 to put the call with person A on hold.

 

2

Wait for the dialling tone, and dial the number

 

 

of person B.

 

3

Dial R, 2 to switch back to person A.

 

 

Person B is put on hold.

 

 

Call Waiting

You are in a phone conversation with person A

 

while person B is calling you. The phone produces

 

a waiting tone and - if CLIP is enabled and CLIR

 

disabled - displays the number of person B.

 

Do one of the following:

 

 

To reject the incoming call, dial R, 0.

 

 

To terminate the first call and to switch to the

 

 

waiting call, dial R, 1.

 

 

If you do not want to terminate the first call,

 

 

dial R, 2 to keep the first caller on hold while

 

 

answering the second call.

 

 

To return to person A while putting

 

 

person B on hold, dial R, 2.

 

 

To return to person A while terminating

 

 

the call with person B, dial R, 1.

 

 

Call Transfer

You receive a phone call from person A and you

 

want to transfer him to person B.

 

1

Dial R, 2.

 

2

Wait for the dialling tone.

 

3

Dial the number of person B.

 

 

Person B picks up the phone.

 

4

Dial R, 4 to transfer the call.

 

5

Hang up.

 

 

 

E-DOC-CTC-20051017-0149 v1.0

45