RCA DRS7000N manual Playing Discs, Regional Coding, Using Different Menus, To Load and Play Discs

Chapter 4: Playing Discs

VIDEO CD

•DVD Video discs – contain picture and sound (DVD-R, DVD- RW, DVD+R, DVD+RW, and DVD ROM are compatible with this player)

•CDs (CD-R, CD-RW, CD ROM) – Audio CDs contain musical or sound content only. MP3 discs are CDs that contain MP3 files. This player is also capable of playing CDs that contain JPEG files.

•Video CD discs – Like DVD video discs, Video CDs contain picture and sound content. The difference is the amount of information that can be stored on the disc. VCDs typically have lower picture and sound quality than DVD discs.

You can’t play the following types of discs:, Laserdiscs, CD-I, CD-ROM (computer-only discs), multisession CDs, or discs recorded using other broadcast standards (i.e. PAL or SECAM).

Regional Coding

Both the Digital Media Recorder and the discs are coded by region. These regional codes must match in order for the disc to play. This player’s code is region 1.

Using Different Menus

Each disc is programmed with different features. There are three separate types of menus that you can use to access features:

•The Disc menu – The Disc menu is part of each disc and is separate from the Digital Media Recorder’s menu. The contents of each Disc menu vary according to how the disc was authored and what features are included.

To make the Disc menu appear, press the MENU button while the disc is playing.

•The Digital Media Recorder’s Info Display – The Info Display appears as icons across the top of the screen when a disc is playing. It can only be accessed while you are playing a disc. It’s turned on and off with the INFO button on the remote.

•The Digital Media Recorder menu – To access the Digital Media Recorder’s menu system, press the MENU button. If you’re playing a disc, press STOP (the Digital Media Recorder’s menu appears automatically).

Remember: A feature will only work if the disc was programmed with that feature. For example, if you choose subtitles on the Info Display, the subtitles will only appear if the disc was created with subtitles. If a menu or icon is “grayed out” it means that item (or feature) isn’t available.

		'tt	C	a
			C	attcc
	n'				hh	UU
	a
C						pp
										d
									p(Wi escree
							tc	h	U	nV
										e
										r
										s
							a				i
							C			n	o
							t
								'n		)
									aC

This is an example of a	This is an example of a
one-sided disc.	two-sided disc — the title
	is usually in the center
	of the disc.

Note: Some discs may not be compatible due to laser pickup and disc design.

To Load and Play Discs

Turn on the TV and your Digital Media Recorder (press ON•OFF on the remote or press the STANDBY/ON button on the Digital Media Recorder).

1.If necessary, tune the TV to its Video Input channel (if you need more information, go to page 16).

2.Press the OPEN/CLOSE button (the disc tray opens).

3.Place a disc gently into the tray with the disc’s label facing up (double-sided discs have content on both sides, so you can place either side up).

4.Press the OPEN/CLOSE or PLAY button. The disc tray closes. The Digital Media Recorder reads the disc’s table of contents, and then one of three things happens depending on how the disc was programmed:

•The disc starts playing.

•The disc menu appears on the screen. One of the options will start disc play. Highlight that option and press OK.

•The Digital Media Recorder’s main menu appears on the screen. Highlight the Disc menu and press PLAY.

When you stop playing a disc, the player remembers where you stopped. When you start playing the disc again, the Digital Media Recorder picks up where you left off unless the disc is removed or the player is unplugged, or you press the STOP button twice.

32