REFERENCE

ACCESSORY INFORMATION

Antenna (or cable-TV) connections are made with either coaxial antenna cable or twin-lead cable. Coaxial cables are shielded so they are less susceptible to hum or interference from adjacent cables.

Most audio/video connections between components can be made with shielded audio and video cables that have RCA-type phono connectors.

 

 

 

 

 

 

 

 

 

 

Push-on Connector

 

 

 

 

 

 

 

 

 

 

Screw-on Coaxial

 

 

 

 

 

 

 

 

 

 

Round 75-ohm coaxial cable

 

Connector

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Flat 300-ohm twin-lead cable

The following accessories are available from most dealers and electronics supply stores in case you want to position your components farther apart or need additional cables.

Antenna Cables

 

 

 

 

 

 

 

 

 

 

 

 

Screw-on Cable attaches to

 

 

 

 

 

 

 

 

 

 

 

 

the round antenna connectors

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(called 75-ohm F-type) on the

 

 

 

 

 

 

 

 

 

 

 

 

back of your VCR or TV. The

VH81 (3-ft)

 

 

 

 

 

 

 

 

 

 

 

ends screw onto the connectors

 

 

 

 

 

 

 

 

 

 

 

for a secure connection.

VH82 (6-ft)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Push-on Cable attaches to the

 

 

 

 

 

 

 

 

 

 

 

 

round antenna connectors

 

 

 

 

 

 

 

 

 

 

 

 

(called 75-ohm F-type) on the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

back of your VCR or TV. Ends

VH89 (6-ft)

 

 

 

 

 

 

 

 

 

 

 

push on for a quick connection.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Audio/Video Cables

Standard Audio/Video cable with RCA-type phono plugs (such as No. VH83)

Color-Coded Jacks

The jacks on the TV’s monitor panel are color-coded for ease of use. The video jacks are yellow, the right audio jacks are red, and the left audio jacks are white. When connecting components to each other, be sure that you always connect left outputs to left inputs and right outputs to right inputs. If a component has only one output (mono), connect it to the l/mono input jack.

To connect S-VHS (Super-VHS) components, an S-VHS video cable is required.

S-Video cable (such as No. VH913)

Gold-Tipped cable VH83 (6-ft)

Monaural VCR Dubbing

Cable Double cable that lets you connect the video and audio jacks of two VHS VCRs to duplicate tapes. Can also be used to connect a VCR to your TV. Cable is color-coded and shielded. Has RCA-type phono plugs on each end.

Stereo VCR Dubbing Cable

Triple cable that lets you connect the VIDEO and AUDIO jacks of stereo components.

Gold-Plated Jacks and Gold-Tipped Cables

Gold plating helps prevent oxidation of contacts which provides much less loss than conventional contacts. A complete line of gold-tipped cables is available to help you obtain optimum performance from your equipment.

Gold-Tipped cable

VH84 (6-ft)

S-Video Cable has multi-pin connectors on each end for connecting S-Video components to your TV.

VH976 (6-ft)

VH913 (12-ft)

42

Page 44
Image 44
RCA F19430 manual Accessory Information, Antenna Cables, Audio/Video Cables, Color-Coded Jacks