SETUP AND CONNECTIONS
ADVANCED CONNECTIONS
Advanced connections give you better sound and video by separating the audio and video signals and enabling you to connect multiple components.
This section describes the types of inputs available on the back of your TV and suggests ways you can use them for optimum performance.
Back of the TV
The diagram below describes each of the back panel jacks. When connecting A/V cables, be sure to connect corresponding jacks (Video to Video and Audio to Audio). On Model F19430, be sure to connect Right Audio to Right Audio and Left Audio to Left Audio between stereo components).
VIDEO and AUDIO Inputs
Connect any one of the following components:
• VCR | • Internet Access Device |
• Laserdisc Player | • DVD Player |
•Satellite Receiver
To view the component connected to the AUDIO and VIDEO jacks, use the INPUT button on the remote.
Note: if you plug a component into the front of the TV, the jacks on the back of the TV will not operate.
Once you have made your connections, you will need to program the TV to tune to the video input channel in order to see and hear audio and video from a component such as a VCR or DVD player.
Please note that Model F19420 has one mono AUDIO jack. Model F19430 has stereo AUDIO jacks.
VIDEO JACK: Connect the Video jack of the component to the VIDEO IN jack of the TV.
ANT (Antenna)
Receives the signal from a cable, cable box, or
ANT |
| AUDIO IN | |
VIDEO IN | L | R | |
Model F19420 AUDIO JACK: Connect the Audio jack of the component to the AUDIO IN jack of the TV.
Note: If you are connecting a stereo component, you may need a
Model F19430 AUDIO JACKS: Be sure to connect the left Audio jack of the component to the Left AUDIO IN jack of the TV (next to VIDEO IN jack) and the Right Audio jack of the component to the Right AUDIO IN jack of the TV.
Note: If you are connecting a mono component, connect the Audio jack to the Left AUDIO jack of the TV.
6
