RCA HD61LPW62 manual Plug in the TV, Put Batteries in the Remote, Turn on the TV

Connections & Setup

Plug in the TV

Plug the flat end of the cable into the power jack on the back of the TV. Then plug the other end of the power cord into an appropriate wall outlet. Be sure to insert the plug completely. Do not plug the TV into an outlet controlled by a light switch.

Note: When you first plug your TV into an outlet, the Power indicator on the front panel will light and blink for approximately 30 seconds and then go off during the initialization of the TV. This happens only when the TV is unplugged and plugged back in. The TV can only be turned on after the Power indicator goes off.

Tip

When remote batteries are low, the component button corresponding to the mode you’re in flashes when you press a button. Also, a message might appear on the TV screen and disappear within a few seconds. Press CLEAR and replace the batteries to remove the message.

Put Batteries in the Remote

•Remove the battery compartment cover from the back of the remote by pushing down on the tab and lifting cover.

•Insert 2 fresh “AA” batteries. Make sure the polarities (+ and -) are aligned correctly with the polarities inside the remote.

•Replace the cover.

Turn on the TV

Press TV on the remote, or press the Power button on the TV’s front panel.

Note: Pressing the TV button turns on the TV and puts the remote into TV mode. “TV mode” means that the buttons on the remote control operate the TV’s functions.

VCR	ON•OFF	TV	TV
DVD AUDIO AUX•HD SAT•CABLE			button
MUTE		FORMAT
	CH +
L		V
O		O
V		L
	CH-
BACKLIGHT		GO BACK
SKIP	GUIDE	INFO
	OK		Arrow
			buttons
MENU		CLEAR	OK button
1	2	3	MENU button

Tip

To access the initial setup menus, press MENU and choose Assisted Setup.

Use the Remote Control to Complete the Assisted Setup

The technical term is “Navigation” – how you move through the on- screen menus. The method is the same throughout the menu screens: highlight your choice and select it.

To use the TV’s menus, first press the TV button on the remote control to put the remote in TV mode. When the Assisted Setup screen appears, use the arrow buttons to highlight one of the items listed in the menu. Use the up or down arrow button to move up or down. Use the right or left arrow button to move right or left.

To select the item that you’ve highlighted, press OK.

Note: Highlighted means that the menu item stands out from other menu items on the list (appears darker, brighter, or a different color).

Complete the Assisted Setup

Your TV’s menu system allows you to customize your TV’s features. On-screen information helps you choose settings to match your setup. The first time you turn on your TV, the Assisted Setup screen appears automatically. Select Begin Setup to start or select Cancel Setup to exit.

Chapter 1 19