MediSense PCx manual Change Setup, On the monitor

Change Setup:

If the monitor displays a message not indicated in these procedures, please refer to section 10, Troubleshooting.

Use these steps to access the Change Setup menu:

What You See	What You Do	Comments
on the Display

1.Press On/Off to turn on the monitor.

The Abbott logo screen will appear for a few seconds followed by the product name, the software version screen and then the Test Mode menu.

2. Press Menu.	The Menu Mode menu
	will appear.

3. Press 5 for Change	The display prompts the
Setup.	operator to enter a
	password of up to 8
	characters. The password
	is displayed as asterisks
	on the monitor.

4.Key in the password, then press Enter. If the password is entered incorrectly, the monitor displays error message: “Incorrect Password.” Press Clear twice, verify the password then re-enter the correct password and press

Enter.

The factory set password is 123. Once in the Change Setup Mode, it is suggested that the administrator change the password. This can be done in the System Setup/Set Password option.

8-5

Questions? Refer to Page 10-13 For Customer Care Information.