Review/Change Test Setup for Test Type
The options set with the Review/Change Test Setup for Test Type apply to different tests that may be performed, such as glucose. Use this menu to review or change these setups for Test Type:
Units:
Display test results in certain measurement units. The options are:
•mg/dL
•mmol/L
Sample Type:
Distinguish between different types of blood samples used for patient tests. The options are:
•Prompt to select the blood sample type for each patient test.
•Default to Capillary or Arterial for all patient tests.
•Default to Venous for all patient tests.
Action Range:
Set the range (low and high) when action should be taken based on the patient result obtained. The options are:
•Disable the action range.
•Enable and set the action range.
Questions? Refer to Page
