
What You See on the Display
What You Do | Comments |
|
|
8.Enter number of patient tests between
9.Press 1 to continue to the Security Operator ID Not Certified screen.
10.The administrator will select one of the following options:
Press 1 – Next, to continue; skip forward to step 13.
Press 2 – Change, to change Operator ID Security.
The display returns to the Security QC Interval menu.
The display shows the Security Operator ID Not Certified screen.
The display shows the Operator ID Not Certified options.
11.The administrator will select one of the following options:
Press 1 – Allow Test.
Press 2 – Warn.
Press 3 – Lockout.
12.Press 1 to continue to the Security Strip Lot Not on List screen.
The display is returned to the Security Operator ID Not Certified screen.
The display shows the Security Strip Lot Not on List screen.
Questions? Refer to Page