
Review/Change Setup for Date and Time:
Refer to the beginning of the Review or Change Setup section for step-
If the monitor displays a message not indicated in these procedures, please refer to section 10, Troubleshooting.
What You See on the Display
What You Do | Comments |
|
|
1.Press 4 for Date and Time.
2.The administrator will select one of the following options:
Press 1 – Next, to continue to Date menu; skip forward to step 6.
Press 2 – Change, to change current time.
3.Enter the time in hours and minutes then press Enter. Include leading zeros: 04 for 4.
The display shows the Time menu.
The display shows the Set Time option.
The display is returned to the Set Time menu.
4. Select either 1 – AM | The display shows the |
or 2 – PM. | user selected time. |
5. Press 1 – Next, to | The display shows the |
continue to Date menu. | Date menu. |