Proficiency Test | 6 |
|
|
The Proficiency Test menu enables the operator to perform unknown sample test challenges if required by facility policy.
Use the following procedures to perform a proficiency test.
If the monitor displays a message not indicated in these procedures, please refer to section 10, Troubleshooting.
What You See | What You Do | Comments | |
on the Display | |||
|
| ||
|
|
|
1.Press the On/Off button to turn on the monitor.
The Abbott logo screen appears for a few seconds, followed by the product name, the software version screen, then the Test Mode menu.
2.Press Menu.
3.Press 2 – Proficiency Test.
4.Scan or manually enter the Operator ID via the keypad, then press
Enter.
5.Scan or manually enter the Sample ID via the keypad, then press
Enter.
The Menu Mode screen now appears.
The monitor will prompt for the Operator ID to be scanned or entered.
The monitor will prompt for the Sample ID to be scanned or entered.
The monitor will prompt for the Strip Lot number to be scanned or entered.
Questions? Refer to Page
