MediSense PCx manual Review / Change Setup

Review / Change Setup 8

The Precision PCx Monitor provides setup options to customize the testing procedures and requirements. These standards promote good laboratory practices for operators.

Since the steps to review or change setup options are similar, the two sub-menus are combined in one section. Any operator can review the setup information; only an administrator (manager) with the password can change the setup information.

The Review Setup feature enables an operator to review only the settings for Test Setup, System Setup, System Status and Date and Time.

The Change Setup feature enables an administrator to review or change the settings for Test Setup, System Setup, System Status, Date and Time, and Edit Lists.

The Test Setup menu includes: All Tests, Patient Test, Control Test, Security and Test Type.

The System Setup menu defines the look or appearance of the data as it is displayed on the monitor, such as language and formats. The menu includes: language, beeper on/off, date format, time format, set password and restore defaults.

The System Status menu allows a review of the current status of the monitor's operating system: battery power, temperature, memory gauge and software version.

The Date and Time menu displays the current date and time.

The Edit Lists menu changes the approved Operator ID or Test Strip Lot lists.

The Precision PCx Menu Tree on the following page will outline the above menus and the sub-menus.

8-1

Questions? Refer to Page 10-13 For Customer Care Information.