![](/images/new-backgrounds/1256756/256756147x1.webp)
Review/Change Test Setup for Patient Test:
Refer to the beginning of the Review or Change Setup section for
If the monitor displays a message not indicated in these procedures, please refer to section 10, Troubleshooting.
What You See on the Display
What You Do | Comments |
|
|
1.Press 1 – Test Setup.
2.Press 2 – Patient Test.
3.The administrator will select one of the following options:
Press 1 – Next; skip forward to step 14.
Press 2 – Change; to change Patient ID.
4.The administrator will select one of the following options:
Press 1 – Disabled; (returns to the previous screen).
Press 2 – Optional. Press 3 – Required.
The display shows the Test Setup menu.
The display shows the Patient Test, Patient ID Barcode screen.
The display shows the Patient ID options.
If Disabled is selected, the display will not prompt for Patient ID. If Optional or Required is selected, the operator can enter a minimum and maximum number of digits, between