Control History
The Precision PCx monitor can store up to 1,000 control tests that can be retrieved by the following categories:
All Tests: This shows all control test results in memory starting with the most recent test result in memory (reverse chronological order). Operator ID: This shows the control test results that were performed by a particular operator, starting with the most recent test.
Outside Range: This shows all the control test results that fell outside of the acceptable ranges.
Comment Code: This shows all the control test results by comment code.
Date: This shows the control test results performed on a specific date, starting with the most recent test of the day.
Data Review for Control History for All Tests:
Please refer to page
Note: If no information is stored for the desired category that was selected, the following message will be displayed on the monitor: “No Stored Tests”.
Note: If no tests match the criteria specified, this message will be
displayed on the monitor: “No Tests Match Request”.
If the monitor displays a message not indicated in these procedures, please refer to section 10, Troubleshooting.
What You See | What You Do | Comments | |
on the Display | |||
|
| ||
| 1. Press 2 – Control | The Control History menu | |
| History. | now appears. |
2. Press 1 – All Tests. | The monitor shows the |
| result of the most recent |
| control test. |
Questions? Refer to Page
