Moving Around the Review/Change Setup Menu
The Review and Change Setup menu options offer the same additional sub-menus (as shown in the Precision PCx Menu Tree). The operators may have to select additional options to access the desired change or review option.
To access these sub-menus or options in both the Review and Change Setup menus, the message 1-Next appears at the bottom of the display. The operator presses 1 to move to the next option. The monitor also allows the operator to go back to the previous option by pressing Clear. The current status or selection for the option appears in bold type on the display.
To change an option, the administrator must access the Change Setup menu (this is password protected). In addition to the 1-Next message that appears at the bottom of the option screen, there is the 2-Change message. The administrator presses 2 to change the option. The active selection for the option now appears in bold type.
When finished reviewing or changing the options, the operator or administrator can press Menu once to return to the beginning of Menu Mode or press Menu twice to go to Test Mode.
In this section the majority of the directions refer specifically to how to change various settings. However, these same directions can be followed as well for reviewing settings under its own menu option.
Differentiation is made between the password protected sections in the Change Setup Menu Option, where only administrators can access the screens, and the non-password protected sections in the Review Setup Menu Option, where operators and administrators can access
the screens.
8-3
Questions? Refer to Page 10-13 For Customer Care Information.
