Review/Change Setup for All Tests:
Refer to the beginning of the Review/Change Setup Section for
If the monitor displays a message not indicated in these procedures, please refer to section 10, Troubleshooting.
What You See on the Display
What You Do | Comments |
|
|
1.Press 1 for Test Setup.
2.Press 1 for All Tests.
3.The administrator will select one of the following options:
Press 1 – Next; skip forward to step 8.
Press 2 – Change.
4.The administrator will select one of the following options:
Press 1 – Allow Test; skip forward to step 7.
Press 2 – Warn.
Press 3 – Lockout.
5.The administrator will select one of the following options:
Press 1 – Hours.
Press 2 – Days.
The display shows the Test Setup menu.
The display shows the Upload Interval menu.
The display shows the current settings in bold. If 2 is pressed, the display shows the Upload Interval options.
If 2 or 3 is pressed, the display will show the upload interval hours and days option.
The display prompts for the number of days/hours to be entered.
Questions? Refer to Page
