
What You See on the Display
What You Do | Comments |
|
|
6.Enter 1-99 hours or
1-99 days then press
Enter.
7.Press 1 to continue to the All Tests Operator ID screen.
8.The administrator will select one of the following options:
Press 1 – Next, return to the Test Setup menu.
Press 2 – Change.
9.The administrator will select one of the following options:
Press 1 – Disabled; skip forward to step 13.
Press 2 – Optional.
Press 3 – Required.
10.The administrator will enter minimum and maximum numbers between
Key in the minimum number of digits for an operator ID then press
Enter.
Key in the maximum number of digits for an operator ID then press
Enter.
The All Tests Upload Interval screen will be displayed.
The display shows the All Tests Operator ID menu.
The display shows the Operator ID options.
If Disabled is selected, the display will not prompt for Operator ID. If Optional or Required is selected, the administrator can enter a minimum and maximum number of digits, between
The display shows the Operator ID Barcode options.