MediSense PCx manual Data Review for Patient History by Comment Code

Data Review for Patient History by Comment Code:

Please refer to page 5-2 of the Data Review section for the step-by-step instructions to access the Data Review menu.

Note: If no information is stored for the desired category that was selected, the following message will be displayed on the monitor: “No Stored Tests”.

Note: If no tests match the criteria specified, this message will be

displayed on the monitor: “No Tests Match Request”.

If the monitor displays a message not indicated in these procedures, please refer to the section 10, Troubleshooting.

What You See on the Display

What You Do Comments

1.Press 1 – Patient History.

2.Press 5 – Comment Code.

3.Scan or manually enter the desired comment code via the keypad, then press Enter.

The Patient History menu now appears.

The monitor will prompt for the comment code to be scanned or entered.

The monitor will show the most recent test result for the selected comment code.

5-11

Questions? Refer to Page 10-13 For Customer Care Information.