Precision PCx Test Strips

There are now two types of Precision PCx test strips that may be used for testing with this system. The target area of the original Precision PCx biosensor test strip is on the top of the strip. The target area of the new Precision PCx Plus Test Strip with TrueMeasure™ Technology is at the end of the strip. Only Precision PCx branded test strips should be used for testing with this system. Note: For data management, Precision PCx Plus Test Strips can be used only in conjunction with

QC Manager 3.0.

Inside each carton of test strips are test strip instructions for use. The instructions contain important information about the test strip such as: Storage and Handling, Sample Collection and Preparation, Quality Control and Limitations of the Procedure. The section “Limitations of the Procedure” contains the operating ranges for the system and the test strips. Please read the instructions for use carefully.

Lot Number

Lot Number

Barcode number

Barcode

Precision PCx

Test Strip

 

Barcode number

Expiration Date

Expiration Date

 

Control Test Ranges

 

 

Control Test Ranges

Barcode

 

 

 

 

Precision PCx Plus Test

 

 

Strip with TrueMeasure

 

 

Technology

 

Target Area

Target Area

Contact Bars

Contact Bars

Precision PCx Test Strip

Precision PCx Plus Test Strip with

For Use with Precision PCx v2.0, v2.1 and v2.2

TrueMeasure Technology

 

For Use with Precision PCx v2.2 Only

Target area: A small green and white oval where you place a drop of blood on top of the test strip.

Target area: A white area where you place a drop of blood at the end of the strip. You can apply blood to the edge of the strip or on the top of the strip within this white area.

Contact bars: At the opposite end of both test strips are three black contact bars to be inserted into the test strip port of the monitor.

2-2

Page 9
Image 9
MediSense manual Precision PCx Test Strips, Contact Bars