Add a Test Strip Lot to the Strip Lot List:
What You See on the Display
What You Do | Comments |
|
|
1.Press 1 – Add.
2.Press Scan or manually enter* the test strip lot number via the keypad and press Enter.
The display shows the Scan or Enter Strip Code screen.
The display shows the Strip Code option.
The operator can return to the Strip Lot menu to add additional test strip lots or can continue to the next menu to set minimum and maximum control solution ranges for the test strip lot.
3.The administrator will select one of the following options:
Press 1 – Continue.
Press 2 – Change, to change the control ranges.
4.Key in the minimum and maximum values for the low control, press Enter after each value entered.
5.Key in the minimum and maximum values for the normal control, press Enter after each value entered.
The display prompts the operator to enter in the test strip lot minimum and maximum values for the low control test.
The display prompts the operator to enter in the test strip lot minimum and maximum values for the normal control test.
The display prompts the operator to enter in the test strip lot minimum and maximum values for the high control test.
* Manual entry of strip lots with
Questions? Refer to Page
