MediSense PCx manual Data Review for Patient History by Operator ID

Data Review for Patient History by Operator ID:

Please refer to page 5-2 of the Data Review section for the step-by-step instructions to access the Data Review menu.

Note: If no information is stored for the desired category that was selected, the following message will be displayed on the monitor: “No Stored Tests”.

Note: If no tests match the criteria specified, this message will be

displayed on the monitor: “No Tests Match Request”.

If the monitor displays a message not indicated in these procedures, please refer to section 10, Troubleshooting.

What You See on the Display

What You Do Comments

1.Press 1 – Patient History.

2.Press 3 – Operator ID.

3.Scan or manually enter the Operator ID via the keypad, then press

Enter.

The Patient History menu now appears.

The monitor will prompt for the Operator ID to be scanned or entered.

The monitor shows the result of the operator's most recent patient test result.

5-7

Questions? Refer to Page 10-13 For Customer Care Information.