Data Review for Control History by Comment Code:
Please refer to page
Note: If no tests are stored for the desired category that was selected, the following message will be displayed on the monitor: “No Stored Tests.”
Note: If no tests match the criteria specified, this message will be
displayed on the monitor: “No Tests Match Request”.
If the monitor displays a message not indicated in these procedures, please refer to section 10, Troubleshooting.
What You See on the Display
What You Do | Comments |
|
|
1.Press 2 – Control History.
2.Press 4 – Comment Code.
3.Scan or manually enter the comment code via the keypad, then press
Enter.
The Control Test History menu now appears.
The monitor will prompt for the comment code to be scanned or entered.
The monitor will display the result of the most recent control test for the specified comment code.
Questions? Refer to Page
