![](/images/new-backgrounds/1256756/256756159x1.webp)
Review/Change Test Setup for Control Tests:
Refer to the beginning of the Review or Change Setup section for step-
If the monitor displays a message not indicated in these procedures, please refer to section 10, Troubleshooting.
What You See on the Display
What You Do | Comments |
|
|
1. Press 1 – Test Setup. | The display shows the |
| Test Setup menu. |
2.Press 3 – Control Test. The display shows the Control Test Levels screen. The monitor can be set to perform any combination of low, normal and high control tests.
3. The administrator will | The display shows the |
select one of the | Control Test Levels |
following options: | options. |
Press 1 – Next, to review |
|
Control Test Result; skip |
|
forward to step 6. |
|
Press 2 – Change, to |
|
change Control Test |
|
Levels option. |
|
4. The administrator will | The activated control |
select one or a | level(s) are in bold type. |
combination of the |
|
following options: |
|
Press 1 – Low, to activate |
|
low control. |
|
Press 2 – Normal, to |
|
activate normal control. |
|
Press 3 – High, to activate |
|
high control. |
|
Press 4 – to return to |
|
Control Test Levels screen. |
|