What You See on the Display
What You Do | Comments |
|
|
4.The administrator will select one of the following options:
Press 1 – Allow Test.
Press 2 – Warn.
Press 3 – Lockout.
5.The administrator will select one of the following options:
Press 1 – Time Interval: continue to step 6.
Press 2 – Time of Day: skip to step 7.
Press 3 – Patient Tests: skip to step 8.
6.Enter a Time Interval number between
7.Enter up to 3 times of the day in chronological order, starting at midnight. Press Enter to confirm each time. Skip forward to step 9.
The display shows
the QC Interval Security menu. The operator can choose between QC intervals. The settings are:
•Time Interval – QC Interval based on a set number of hours between control tests.
•Time of Day – choose up to three times during the day that QC Interval will take place.
•Number of Patient Tests – QC Interval based on the number of patient tests specified.
QC Time Interval option, the Time of Day option, or the Number of Patient Tests option.
The display returns to the Security QC Interval menu.
The display returns to the Security QC Interval menu.
