Delete One Operator on the Operator List by Entering ID:
What You See on the Display
What You Do | Comments |
|
|
1.Press 2 – Delete.
2.Press 1 – Enter ID.
3.Press Scan or manually enter the Operator ID via the keypad and press Enter.
4.The administrator will select one of the following options:
Press 1 – ReEnter ID. Return to step 3.
Press 2 – Delete.
5.The administrator will select one of the following options:
Press Clear to return to the Operator ID List Menu.
Press Menu to return to the Menu Mode.
Press On/Off to turn off the monitor.
The display shows the Delete Operator ID menu.
The display shows the Scan or Enter Operator ID menu. Enter the Operator ID.
The display prompts the operator to verify the delete.
The ID is deleted from the list and the display returns to the Delete Operator ID menu.
Questions? Refer to Page
