What You See on the Display
What You Do | Comments |
|
|
15.The administrator will select one of the following options:
Press 1 – Next, return to the Test Setup menu.
Press 2 – Change, change the Memory Full options.
Allow Overwrite will automatically overwrite the existing data. Prompt for Overwrite will notify the operator that the data will be overwritten, giving the operator the choice to overwrite the data or not. Lockout will lockout the operator from overwriting any data until the data has been uploaded.
16.The administrator will select one of the following options:
Press 1 – Allow
Overwrite.
Press 2 – Prompt for Overwrite.
Press 3 – Lockout.
17. The administrator will select one of the following options:
Press 1 – Next, return to Test Setup menu.
Press Menu to return to the Menu Mode.
Press On/Off to turn off the monitor.
The display is returned to the Control Test Memory Full screen.
Questions? Refer to Page
