
Data Review for Patient History by Selected Date:
Please refer to page
Note: If no information is stored for the desired category that was selected, the following message will be displayed on the monitor: “No Stored Tests”.
Note: If no tests match the criteria specified, this message will be
displayed on the monitor: “No Tests Match Request”.
If the monitor displays a message not indicated in these procedures, please refer to the section 10, Troubleshooting.
What You See on the Display
What You Do | Comments |
|
|
1.Press 1 – Patient History.
2.Press 6 – Date.
3.Enter the desired date for review then press
Enter.
The Patient History menu now appears.
The monitor will now prompt for the desired date to be entered.
The operator will enter in the date using two digits for month/day/year.
For example, June 8, 2001 becomes 06/08/01.
Questions? Refer to Page