Using the TV’s Features
3.Use the left and right arrow buttons to access other menus.
4.Press OK, or MENU, or use the down arrow button to see the menu options.
If you are highlighting a digital channel, the channel label will include a subchannel, such as CBS
Listings menu selection | Action buttons |
|
Network logos (if available) or labels
Blue action | OK | Green action |
button |
| button |
Listings
The Listings appear each time you enter the GUIDE Plus+ system. They display the current programming for each channel. The current program of Antenna A is displayed in the video window.
•Press the up and down arrow buttons on the remote to browse channel listings and the channel up and down buttons to page through the listings. Use the right and left arrow buttons to browse future program listings.
•Press the Green button to skip ahead 24 hours; press the Blue button to go back 24 hours.
•To tune to a channel, highlight the program you want to view in the channel listings and press OK.
•Directly access a channel by using the number buttons. To access a digital channel, enter major # (13), right arrow, then subchannel #.
Use the Guide Action Buttons as described below.
Guide Action Buttons
The Blue and Green action buttons’ actions or commands change according to where you are in the GUIDE Plus+ system. Be sure to look at the action bar before pressing the action buttons.
When highlighting a program, the following Action buttons appear:
•Watch Press the Blue button on the remote to place a timer into the Schedule so the TV turns on and tunes to the program highlighted in the channel listing.
•Record Press the Green button on the remote to place a timer into the Schedule so the VCR records the program highlighted in the channel listing.
If you have a cable box, changing channels on the TV causes the cable box channel to change while recording.
Record appears only if you have set up the GUIDE Plus+ system and specified your VCR type.
Important Note: You need to make sure that your VCR is tuned to the Line INPUT, and is turned off prior to recording start time. Do not change channels on the TV or VCR when making a recording.
Expanded Information
Press INFO on the remote to see additional program information.
Chapter 3 | 37 |
