First-Time Operation

To AC Wall

 

Outlet 100-

Reference Marks

240 Volts,

 

50/60 Hz.

Adapter/Charger

 

Hold Battery

Flush and

Slide

REFRESH

Button

POWER

Indicator

CHARGE

Indictor

Caution: When a battery is attached to the adapter/charger, do not turn them upside down. The battery may fall off and be damaged or cause injury.

Charge the Battery

If the DC cable is attached to the DC OUT jack on the adapter/charger, remove its plug.

1.Plug adapter/charger into nearest AC outlet (100-240V, 50/60Hz). The POWER indicator lights.

2.Align reference marks on battery with marks on adapter/charger, and slide the battery in the direction of the arrow until it locks into place.

3.If the battery is properly connected, the adapter/charger’s CHARGE indicator will light.

Note: The CHARGE indicator will flash rapidly if the battery is not installed properly. Remove the battery from the adapter/charger and attach it again. If the indicator still flashes, the battery cannot be charged.

4.When the CHARGE indicator turns off, remove the charged battery by sliding it off the adapter/charger.

5.Remove the power cord from the AC outlet.

Refresh the Battery

The battery will provide increased operation time if you “refresh” it before every charging. The refresh feature “refreshes” the battery by completely discharging it. Refreshing takes approximately 4 hours.

1.Plug in the adapter/charger and attach the battery.

2.Press REFRESH. The CHARGE indicator flashes slowly while the battery discharges.

3.When discharging is completed, the CHARGE indicator stops flashing. Then the battery begins charging.

4.After the battery is charged, the CHARGE indicator turn off.

13

Page 15
Image 15
RCA ProV600 manual Charge the Battery, Refresh the Battery