Recording
Time Counter
The
REW
Button
PLAY
Button
STOP
Button
DISPLAY BLANK
REW PLAY F.FWD
STOP PAUSE
EJECT
COUNTER | ZOOM |
| |
MEMORY | T | W |
|
|
|
| |
Button | DISPLAY | REC | COUNTER |
|
| ||
| COUNTER | RESET | |
STOP | MEMORY RESET | ||
|
| Button | |
Button | STOP | PLAY | PLAY |
REW |
|
| |
REW | F.FWD | Button | |
Button |
|
|
|
PAUSE
M 0:00:00
VCR/CAM
Button and
VCR Indicator
Time Counter With Memory
Stop Turned On
To Use the Memory-Stop Feature
1.Locate the place on the tape you want to return to, press the VCR/CAM button to light the VCR indicator, and press PLAY.
2.Press the COUNTER RESET button on the remote to reset the time counter to 0:00:00.
3.Press the COUNTER MEMORY button on the remote control to turn memory stop on. An M appears in front of the time counter when memory stop is on.
4.Continue to play the tape. When you want to return to the place you marked, press the STOP button.
5.Press the REW button. The tape will rewind to the time counter reading of M 0:00:00.
Notes: During rewind, the tape might not stop exactly at the M 0:00:00 point.
A minus ( – ) will appear in front of the time counter if the tape is rewound farther back than a time counter reading
of 0:00:00.
34
