Using the Adapter/Charger to Power Your Camcorder | RCA ProV600

First-Time Operation

Using the Adapter/Charger to Power Your Camcorder

The adapter/charger attaches to the camcorder and lets you power your camcorder directly from standard household power. The adapter/charger operates on 100-240 volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the camcorder or recharge the battery.

OPEN

To ACButton 100-240,

50/60 Hz

DC IN Jack

DC OUT

Adapter/ JackDC Cable Charger

POWER

Indicator

Attach Adapter/Charger

Remove Adapter/Charger

1.Connect one end of the DC cable to the DC OUT jack on the adapter/ charger.

2.Press the OPEN button and open the LCD monitor.

3.Connect the other end of the DC cable to the DC IN jack on the camcorder and run the cable through the cutout as shown.

4.If the adapter/charger is properly connected, its POWER indicator will light.

Caution: Do not use this adapter/ charger for any other purpose other than charging the AV55 battery pack or supplying power to

the camcorder.

1.Unplug the adapter/charger from the wall outlet.

2.Remove the DC cable from the adapter/charger and camcorder.

3.Close the LCD monitor and press on it gently until it locks into place.

Using an Optional Plug Adapter

An optional plug adapter may be required in some countries.

	Optional AC	AC 100-240V
	Plug Adapter	AC 100-240V
	Plug Adapter

1.Plug the adapter/charger’s plug into the AC plug adapter.

2.Plug the AC plug adapter into the AC outlet.

11

Image 13

RCA ProV600 Using the Adapter/Charger to Power Your Camcorder, Attach Adapter/Charger, Using an Optional Plug Adapter

Contents

ProV600 Camcorder Users guide Product Registration Important Safety Information Assistance Table of Contents Care and Maintenance Optional AccessoriesLimited Warranty Recording Playback First-Time Operation Unpack the camcorder and accessoriesAssistance Attach the shoulder strap Attach lens cap cord and adjust handstrap Attach the adapter/charger Insert a cassette Turn on the camcorder Use the viewfinder Use the LCD Monitor Play back what you have recorded Start and stop recordingTurn off the camcorder Close the monitor and replace the lens cap Review camcorder’s operating controls VCR Green CAM Red Indicator Volume Using an Optional Plug Adapter Using the Adapter/Charger to Power Your CamcorderAttach Adapter/Charger Attach the Charged Battery Using the Battery to Power Your CamcorderRemove the Battery Battery Safety Precau- tions Refresh the Battery Charge the Battery Battery Care and Storage Battery Level Indicator Install Remote’s Lithium Cell Remote Control Camcorder in the CAM Camera Mode Remote Control ButtonsCamcorder in the VCR Mode Buttons Remote Control Sensor Video Cassettes Erase Protection Safety TabCassette Recording Time Recording Times Cassette Care and Storage Insert or Remove a Cassette Making a Recording Recording Insert a tape Attach a power supplyStart and stop recording Zoom in and out Eyepiece Focus Control Using the Viewfinder Using the LCD Monitor LCD Monitor and Viewfinder Displays Beep on IndicatorDate Display Auto DATE, Date Date and Time, or Zoom Indicator Focus Indicators FocuslockStatus Displays Tape-Remaining Display Camera Edit Feature Quick Review FeatureFlying Erase Head Microphone Beep FeatureAutomatic White Balance and Iris AE Automatic Exposure Shutter Speed Control Blank Search Tape-Remaining Display Zooming Using the Zoom Lever Using Focus Lock FocusingConditions Requiring Focus Lock Date/Time Display Clock Lithium Cell Install the Clock Lithium CellRemove the Cell Set the Time and Date Date/Time Display Setting the Time and DateCorrect the Time and Date Time and Date Display Select the Date or Time and Date to Record To Record the Date or Date and Time on Your Tape Time Counter To Use the Memory-Stop Feature Traveling Tips Recording Tips Playback Playback Using the LCD Monitor or ViewfinderTo Play Back a Tape Use LCD monitor Visual Searching Playback FeaturesTape Positioning Stop-Action Pause Playback on TV or VCR with AUDIO/VIDEO in Jacks Installation Viewing What the Camcorder is Seeing or Recording Playback Operation and How to Copy Tapes on the VCR Back of TV VHF Antenna Playback on a TV without Audio/Video Inputs Viewing What the Camcorder Is Recording Playback OperationNormal TV Viewing To order accessories, contact your local Dealer Optional AccessoriesAC201A Soft Carrying Case VH54 Cable Transformer Coaxial RF CablesVH82 6-ft VH90 12-ft Using the Optional AC088 Tripod Accessory Order Form USE Your Credit Card United States and Canada Orders To order accessories, contact your local Dealer Cleaning the Camcorder Care and MaintenanceCleaning the Camcorder’s Lens Cleaning the Camcorder’s LCD Monitor Proper Care and Storage Customer Assistance and ServiceThings to Avoid Trouble Checks Trouble Checks and Adjustments Trouble Checks See Returning equipment to Thomson for repair or exchange For how long after your purchase Limited Warranty If you purchased your camcorder outside the United States Information to User Specifications Index Tape Index Index Tocom Meridian Street Indianapolis,