Mounting the Dish on a Hollow or Cinder Block Wall
c. Push the straps
Step 6c: Snap off straps flush with the wall.
d. Repeat for all four holes.
7.Use a wrench to loosen the nuts on the mounting foot so you have easier access to the mounting holes.
No | Yes |
Step 8: Make sure that the top of the mast will point straight up.
8.Hold the mounting foot over the holes so the top part of the mast will rotate and point straight up.
9.Place washers on each of four #20, 1/4" x 3" machine screws and attach the mounting foot to the wall. Securely tighten the screws.
10.Go on to the next section, “Final Installation,” to complete the installation process.
22 Mounting the Mast
